Table of contents
A two-dimensional half-space problem in an initially stressed rotating medium with microtemperatures
Sunita Deswal, Devender Sheoran, Kapil Kumar KalkalThe purpose of this paper is to establish a model of two-dimensional half-space problem of linear, isotropic, homogeneous, initially stressed, rotating thermoelastic medium with…
Memory-dependent derivative under generalized three-phase-lag thermoelasticity model with a heat source
Biswajit Singh, Smita Pal (Sarkar), Krishnendu BarmanThis study aims to attempt to construct a new mathematical model of the generalized thermoelasiticity theory based on the memory-dependent derivative (MDD) considering…
Effects of heat and mass transfer on the peristaltic motion of Sutterby fluid in an inclined channel
Faseeha Atlas, Maryiam Javed, Naveed ImranThe purpose of this paper is to study the peristaltic mechanism of Sutterby fluid in a symmetric channel with mass and heat transfer.
Response of ramp-type heating in a monoclinic generalized thermoelastic material
Leena Rani, Sushant ShekharThe two-dimensional deformation of a homogeneous, thermally conducting, monoclinic material has been studied by using Laplace and Fourier transforms technique. A linear…
Investigation on effect of process parameter on surface integrity during electrical discharge machining of NiTi 60
Mahendra Uttam Gaikwad, A. Krishnamoorthy, Vijaykumar S. JattiElectrical discharge machining (EDM) of hard materials like NiTi 60 alloys is important as it finds application in different sectors of engineering such as automobile, aircraft…
Modelling and validation of magneto-rheological fluid damper behaviour under impact loading using interpolated multiple adaptive neuro-fuzzy inference system
Mohd Sabirin Rahmat, Khisbullah Hudha, Zulkiffli Abd Kadir, Noor Hafizah Amer, Muhammad Luqman Hakim Abd Rahman, Shohaimi AbdullahThe objective of this paper is to develop a fast modelling technique for predicting magneto-rheological fluid damper behaviour under impact loading applications.
Thermo-diffusion of solid cylinders based upon refined dual-phase-lag models
Ashraf M. ZenkourThe thermo-diffusion analysis of an isotropic cylinder under thermal flux and chemical potential impacts has been discussed. Improvements of Green and Naghdi generalized…
Second law analysis of MHD natural convection slip flow of Casson fluid through an inclined microchannel
B.J. Gireesha, A. RojaMicrofluidics is one of the interesting areas of the research in thermal and engineering fields due to its wide range of applications in a variety of heat transport problems such…
Impact of Hall effect, nonlinear radiation and heat source on MHD Couette–Poiseuille flow of nanoliquid through a rotating channel
S. Sindhu, B.J. Gireesha, G. SowmyaThis report offers the detailed investigation of Couette–Poiseuille flow of nanoliquid with varying viscosity. The analysis is carried out by considering flow between two parallel…
MHD micropolar nanofluid flow through an inclined channel with entropy generation subjected to radiative heat flux, viscous dissipation and multiple slip effects
A. Roja, B.J. Gireesha, B.C. PrasannakumaraMiniaturization with high thermal performance and lower cost is one of the advanced developments in industrial science chemical and engineering fields including microheat…
Fundamental solutions of two 3D rectangular semi-permeable cracks in transversely isotropic piezoelectric media based on the non-local theory
Haitao Liu, Liang WangThe paper aims to present the non-local theory solution of two three-dimensional (3D) rectangular semi-permeable cracks in transversely isotropic piezoelectric media under a…
Finite element analysis of micropolar nanofluid flow through an inclined microchannel with thermal radiation
N.S. Shashikumar, Madhu Macha, B.J. Gireesha, Naikoti KishanIn recent years, microfluidics has turned into a very important region of research because of its wide range of applications such as microheat exchanger, micromixers fuel cells…
Analysis of nonlinear vibration of couple-mass–spring systems using iteration technique
Md. Alal HosenAn iteration technique has been developed based on the Mickens iteration method to obtain approximate angular frequencies. This technique also offers the periodic solutions to the…
Stability analysis of cold-formed channels using mathematical programming techniques
Osama BedairIn this work, a numerical algorithm is presented for stability analysis of cold-formed steel (CFS) channel sections.
Soret, Dufour and radiation effects of a viscoelastic fluid on an exponentially stretching surface using the Catteneo–Christov heat flux model
Kazeem Babawale Kasali, Yusuf Olatunji Tijani, Matthew Oluwafemi Lawal, Yussuff Titilope LawalIn this paper, we studied the steady flow of a radiative magnetohydrodynamics viscoelastic fluid over an exponentially stretching sheet. This present work incorporated the effects…
MoS2-SiO2/EG hybrid nanofluid transport in a rotating channel under the influence of a strong magnetic dipole (Hall effect)
N. Mahato, S.M. Banerjee, R.N. Jana, S. DasThe article focuses on the magnetohydrodynamic (MHD) convective flow of MoS2-SiO2 /ethylene glycol (EG) hybrid nanofluid. The effectiveness of Hall current, periodically heating…
Low velocity impact of Kevlar and ultra high molecular weight polyethylene (UHMWPE) reinforced epoxy composites
Mayyadah S. Abed, Payman S. Ahmed, Jawad K. Oleiwi, Basim M. FadhilComposite laminates are considered one of the most popular damage-resistant materials when exposed to impact force in civil and military applications. In this study, a comparison…
Analysis of free vibrations in transradially isotropic spherically symmetric thermoelastic spheres
Nivedita SharmaThe purpose of this manuscript is to study the vibration characteristics of the spherically symmetric solid and hollow spheres poised of a homogeneous thermoelastic material…
Interaction of Al2O3-Ag and Al2O3-Cu hybrid nanoparticles with water on convectively heated moving material
G.K. Ramesh, G.S. Roopa, SabirAli Shehzad, S.U. KhanThe aim of present work is to study the flow and heat transport structures of hybrid nanoparticles in a moving material. Two types of hybrid nanoparticles have been chosen namely…
Convective heat transport in a heat generating MHD vertical layer saturated by a non-Newtonian nanofluid: a bidirectional study
M. Gnaneswara Reddy, P. Vijayakumari, L. Krishna, K. Ganesh Kumar, B.C PrasannakumaraIn this framework, the three dimensional (3D) flow of hydromagnetic Carreau nanofluid transport over a stretching sheet has been addressed by considering the impacts of nonlinear…
3D flow and heat transfer of micropolar fluid suspended with mixture of nanoparticles (Ag-CuO/H2O) driven by an exponentially stretching surface
S. Manjunatha, B. Ammani Kuttan, G.K. Ramesh, B.J. Gireesha, Emad H. AlyThe purpose of this paper is to discuss the 3D micropolar hybrid (Ag-CuO/H2O) nanofluid past rapid moving surface, where porous medium has been considered.
Multi-objective optimization of carbon/glass hybrid composites with newly developed resin (NDR) using gray relational analysis
Sagar Dnyandev Patil, Yogesh J. BhaleraoIt is seen that little amount of work on optimization of mechanical properties taking into consideration the combined effect of design variables such as stacking angle, stacking…
ISSN:
1573-6105Online date, start – end:
2005Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Dr Xiao-Ping Zhang
- Professor Zhufeng Yue
- Prof Heng Xiao