Rapid Prototyping Journal: Volume 19 Issue 4
Strapline:
The international journal for research on additive manufacturing and 3D printingTable of contents
Prototype production and experimental analysis for circular and profiled conformal cooling channels in aluminium filled epoxy injection mould tools
Khurram Altaf, Ahmad Majdi Abdul Rani, Vijay R. RaghavanThe purpose of this paper is to present a technique of fabricating profiled conformal cooling channels (PCCC) in an aluminium filled epoxy mould using rapid prototyping (RP) and…
Novel polymeric support materials for jetting based additive manufacturing processes
M. Fahad, P. Dickens, M. GilbertJetting‐based additive manufacturing processes are gaining attention due to their high speed of operation, accuracy and resolution. Support material plays an important role in the…
3D roughness profile model in fused deposition modelling
Alberto Boschetto, Veronica Giordano, Francesco VenialiThe paper aims to predict the surface roughness of fused deposition modelling prototypes. Since average roughness is not comprehensive, this study aims to extend the…
Regulating complex geometries using layered depth‐normal images for rapid prototyping and manufacturing
Yong Chen, Charlie C.L. WangMost layer‐based rapid prototyping systems use polygonal models as input. In addition, the input polygonal models need to be manifold and water‐tight; otherwise the built objects…
Efficient three dimensional modelling of additive manufactured textiles
Guy A. Bingham, Richard HagueThe purpose of this paper is to investigate, develop and validate a three‐dimensional modelling strategy for the efficient generation of conformal textile data suitable for…
High temperature material properties of IN738LC processed by selective laser melting (SLM) technology
L. Rickenbacher, T. Etter, S. Hövel, K. WegenerSelective laser melting (SLM) is being investigated by Alstom and IWF due to its flexibility, cost‐ and lead‐time reduction potential for reconditioning of hot gas path components…
Fatigue analysis of FDM materials
John Lee, Adam HuangThe purpose of this paper is to determine the effects of fatigue on fused deposition modeling rapid prototyped acrylonitrile butadiene styrene (ABS) materials.
Weibull growth modeling of laser‐sintered nylon 12
John S. Usher, Timothy J. Gornet, Thomas L. StarrThis paper seeks to present the results of an experiment to investigate the effect of six part orientation (XY, XZ, YX, YZ, ZY, ZX) and a wide range of energy densities on…
![Cover of Rapid Prototyping Journal](/insight/proxy/containerImg?link=/resource/publication/issue/476b550cca0b81c77150a253418480a7/urn:emeraldgroup.com:asset:id:binary:rpj.cover.jpg)
ISSN:
1355-2546Online date, start – end:
1995Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Professor Ian Gibson