Assembly with Conductive Adhesives

Abstract

The electronics assembly industry has fortunately rediscovered conductive adhesives as the search for lead‐free joining materials and improved performance intensifies. Although these intrinsically clean bonding agents are often first sought for their favourable environmental attributes, many are surprised to find that conductive adhesives can solve old and new problems. Today, new polymer solders for SMT allow low temperature processing, finer pitch assembly and wider processing latitude while providing compatibility with a very much larger range of materials than solder. State‐of‐the‐art adhesives are oxide‐tolerant and absolutely no fluxing or cleaning is required. Adhesives work where solder cannot be used. What's more, polymer‐based solder alternatives can run on existing SMT lines — no new equipment is needed. Z‐axis, or anisotropic, bonding agents are uni‐directional conductive materials that solve fine pitch interconnect problems in several areas. The anisotropics now dominate the flat panel interconnect field. Nearly every LCD and other flat panel display is connected with a polymer adhesive. The Z‐axis adhesives are also beginning to enable high density multilayer circuits and MCMs to be built more effectively. Finally, Z‐axis appears to offer the simplest and most cost‐effective means for flip chip bonding. However, special equipment is required. The paper compares the metallurgical solder joint, the present de facto standard, with the polymer composite bond to highlight similarities and important differences. All types of conductive adhesives are discussed including the latest — Area Array Z‐axis types. Bonding materials, assembly processes and performance are also covered.

Citation

Gilleo, K. (1995), "Assembly with Conductive Adhesives", Soldering & Surface Mount Technology, Vol. 7 No. 1, pp. 12-17. https://doi.org/10.1108/eb037885