APPLICATION OF OBJECTIVE MEASUREMENT TO CLOTHING MANUFACTURE

Abstract

The application of objective measurement of the mechanical properties of fabrics in the apparel industry began around 1975 in the Hirakata area, which is one of the centres of men's suit production in Japan. At that time the KESF system had been developed and thereafter spread rapidly. The measurement of mechanical data under low‐load level by the KESF provided useful information for the apparel engineers who needed some means of fabric measurement by which the tailoring process might be controlled. The fabric dimensional stability testing using steam press was also standardised at that time (HESC 103A method). At present, the KESF data and the stability data are essential for apparel engineers and are used widely in the Japanese apparel industry. In addition to the use of objective measurements in each factory, a centre for objective fabric inspection has been recently initiated in the Hirakata area, for the inspection and control of fabric by the objective system for tailoring process control. In addition, a co‐operative work between the apparel engineers and the university has been carried out to develop a new equation for predicting the good appearance of a suit on the basis of fabric mechanical data. Automatic tailoring such as automatic overfeed action on the basis of fabric mechanical property is also carried out under the co‐operation of the university, the apparel industry, and a sewing machine manufacturer (Juki) in Hirakata. The progress of these projects is presented.

Citation

Kawabata, S., Niwa, M., Ito, K. and Nitta, M. (1990), "APPLICATION OF OBJECTIVE MEASUREMENT TO CLOTHING MANUFACTURE", International Journal of Clothing Science and Technology, Vol. 2 No. 3, pp. 18-33. https://doi.org/10.1108/eb002963