Multi-response optimization of EDM parameters using grey relational analysis (GRA) for Ti-5Al-2.5Sn titanium alloy

Abstract

Purpose

In this research, electro discharge machining (EDM) of Ti-5Al-2.5Sn titanium alloy is performed taking gap voltage, pulse on time, peak current and duty cycle as process parameters. The purpose of this paper is to find out the optimal process parameters setting for getting higher machining efficiency.

Design/methodology/approach

For experimental design, a face-centered central composite design (FCCCD)-based response surface methodology (RSM) is used. Multi-objective optimization like grey relational analysis (GRA) is adopted to achieve the higher machining efficiency by means of lower radial overcut (ROC), surface roughness (Ra), tool wear rate (TWR) and higher material removal rate (MRR). For the statistical study, analysis of variance (ANOVA) has been carried out.

Findings

The result shows that gap voltage, peak current and pulse on time are the most efficient parameters for the responses. An optimal parameter setting has been obtained for achieving higher machining efficiency. For validation of the study, confirmation experiment has been performed at optimal parameters setting.

Originality/value

Optimum parameter level for higher machining performance of Ti-5Al-2.5Sn Titanium alloy has been achieved machined by copper electrode during EDM operation.

Citation

Bhaumik, M. and Maity, K. (2021), "Multi-response optimization of EDM parameters using grey relational analysis (GRA) for Ti-5Al-2.5Sn titanium alloy", World Journal of Engineering, Vol. 18 No. 1, pp. 50-57. https://doi.org/10.1108/WJE-06-2020-0210