Multi-physics properties of thermoplastic polyurethane at various fused filament fabrication parameters

Abstract

Purpose

The purpose of this study is to test a flexible polymer with different characteristics compared to other classical polymers mostly used in the additive manufacturing process, and to improve its mechanical properties and microstructure, by modifying different printing parameters, to make it more suitable for various industrial applications.

Design/methodology/approach

Seven parameters were tested, namely, nozzle temperature, bed temperature, layer thickness, printing speed, flow rate, printing time gap between two successive printed layers and raster orientation. Rheological characterizations were conducted to evaluate the influence of nozzle temperature on the melt viscosity of thermoplastic polyurethane (TPU). The effect of thermal printing parameters on the crystallinity behavior was explored. Tomographic characterizations were realized to measure the porosity and evaluate the internal structure quality of printed specimens.

Findings

Increases of the nozzle temperature, bed temperature, layer thickness and flow rate had a positive influence on the tensile strength properties of TPU with a reduction of porosity. Higher printing speeds created defects and negatively influenced the strength properties of TPU. An increase in the printing time gap between layers led to poor interlayer adhesion and decreased the tensile strength. Specimens with layers all oriented parallel to the loading direction exhibited superior mechanical properties compared to other raster orientations.

Originality/value

Thermoplastic elastomers are a unique class of polymers characterized by the combined thermal, chemical and mechanical properties of their elastomer and thermoplastic parts. TPU elastomer, as one of the elastomer families, has found an important position in the bioengineering and three-dimensional printing industry. This study reports a comprehensive study of the impact of additive manufacturing parameters on the properties of TPU.

Citation

Kasmi, S., Ginoux, G., Labbé, E. and Alix, S. (2022), "Multi-physics properties of thermoplastic polyurethane at various fused filament fabrication parameters", Rapid Prototyping Journal, Vol. 28 No. 5, pp. 895-906. https://doi.org/10.1108/RPJ-08-2021-0214