3D printing of continuous cellulose fibre composites: microstructural and mechanical characterisation
ISSN: 1355-2546
Article publication date: 17 July 2023
Issue publication date: 18 October 2023
Abstract
Purpose
Additive manufacturing is a recent technology used in the production of composite materials. The use of continuous fibres as reinforcement is necessary to achieve high mechanical performance. However, making these materials more environmentally friendly is still challenging. The purpose of this study was to investigate the feasibility of 3D printing a composite made of continuous regenerated cellulose fibres using a standard 3D printer generally used for printing polymers.
Design/methodology/approach
The production process was based on a pre-impregnated filament made from a tape containing continuous cellulose fibres and Pebax® matrix. 3D printed composite samples were fabricated using fused deposition modelling. The tape, filament and 3D printed composites were first analysed by means of modulated differential scanning calorimetry and micrography. Tensile tests were then performed, and the mechanical characteristics were determined at each step of the production process. Fracture surfaces were investigated by field-emission gun–scanning electron microscopy.
Findings
Results showed that the mechanical behaviour of the material was maintained throughout the production process, and the 3D printed biocomposites had a stiffness equivalent to that of traditionally manufactured continuous cellulose fibre composites. The obtained 3D printed composites showed an increase in strength value by a factor of 4 and in tensile modulus by a factor of 20 compared to those of unreinforced Pebax® polymer.
Originality/value
This paper demonstrates the feasibility of 3D printing composites based on continuous cellulose fibres, paving the way for new biocomposites made by additive manufacturing.
Keywords
Acknowledgements
The authors thank Camila Pinto de Souza and Arthur Visse for their contribution to this work. This work was partially funded by the French Government program “Investissements d'Avenir” (EQUIPEX GAP, reference ANR-11-EQPX-0018) and by the CPER FEDER project of Région Nouvelle Aquitaine. It pertains to the French Government program “Investissements d’Avenir” (EUR INTREE, reference ANR-18-EURE-0010).
Citation
Touchard, F., Marchand, D., Chocinski-Arnault, L., Fournier, T. and Magro, C. (2023), "3D printing of continuous cellulose fibre composites: microstructural and mechanical characterisation", Rapid Prototyping Journal, Vol. 29 No. 9, pp. 1879-1887. https://doi.org/10.1108/RPJ-04-2023-0121
Publisher
:Emerald Publishing Limited
Copyright © 2023, Emerald Publishing Limited