A heavy-load wall-climbing robot for bridge concrete structures inspection
ISSN: 0143-991x
Article publication date: 23 February 2024
Issue publication date: 9 May 2024
Abstract
Purpose
The purpose of this paper is to present a wall-climbing robot platform for heavy-load with negative pressure adsorption, which could be equipped with a six-degree of freedom (DOF) collaborative robot (Cobot) and detection device for inspecting the overwater part of concrete bridge towers/piers for large bridges.
Design/methodology/approach
By analyzing the shortcomings of existing wall-climbing robots in detecting concrete structures, a wall-climbing mobile manipulator (WCMM), which could be compatible with various detection devices, is proposed for detecting the concrete towers/piers of the Hong Kong-Zhuhai-Macao Bridge. The factors affecting the load capacity are obtained by analyzing the antislip and antioverturning conditions of the wall-climbing robot platform on the wall surface. Design strategies for each part of the structure of the wall-climbing robot are provided based on the influencing factors. By deriving the equivalent adsorption force equation, analyzed the influencing factors of equivalent adsorption force and provided schemes that could enhance the load capacity of the wall-climbing robot.
Findings
The adsorption test verifies the maximum negative pressure that the fan module could provide to the adsorption chamber. The load capacity test verifies it is feasible to achieve the expected bearing requirements of the wall-climbing robot. The motion tests prove that the developed climbing robot vehicle could move freely on the surface of the concrete structure after being equipped with a six-DOF Cobot.
Practical implications
The development of the heavy-load wall-climbing robot enables the Cobot to be installed and equipped on the wall-climbing robot, forming the WCMM, making them compatible with carrying various devices and expanding the application of the wall-climbing robot.
Originality/value
A heavy-load wall-climbing robot using negative pressure adsorption has been developed. The wall-climbing robot platform could carry a six-DOF Cobot, making it compatible with various detection devices for the inspection of concrete structures of large bridges. The WCMM could be expanded to detect the concretes with similar structures. The research and development process of the heavy-load wall-climbing robot could inspire the design of other negative-pressure wall-climbing robots.
Keywords
Acknowledgements
Funding: This work was supported by a grant from the National Key R&D Program of China (No. 2019YFB1600700).
Citation
Lyu, G., Wang, P., Li, G., Lu, F. and Dai, S. (2024), "A heavy-load wall-climbing robot for bridge concrete structures inspection", Industrial Robot, Vol. 51 No. 3, pp. 465-478. https://doi.org/10.1108/IR-11-2023-0273
Publisher
:Emerald Publishing Limited
Copyright © 2024, Emerald Publishing Limited