Performance potential of gas foil journal bearings enhanced with micro taper-grooves on top foil
Industrial Lubrication and Tribology
ISSN: 0036-8792
Article publication date: 8 January 2020
Issue publication date: 6 April 2020
Abstract
Purpose
To improve the load capacity and stability of gas foil journal bearings (GFJB), this paper aims to propose a novel GFJB with taper-grooved top foil.
Design/methodology/approach
A modified bump stiffness model is established considering rounding and friction. By considering the variation of clearance in the circumferential and axial direction, the static and dynamic characteristics of the novel bearing are calculated using the finite difference method, and perturbation method, respectively. The bearing performance under different groove parameters is studied and compared to the traditional bearings.
Findings
The results show that this novel GFJB can bring multi-extra local dynamic pressure and decrease the gas end leakage, which improves the static and dynamic properties. Moreover, as the increment of groove depth, the load capacity and direct stiffness are reinforced. There is an optimal groove width to maximize the load capacity, and the taper-groove is more beneficial to the improvement of bearing performance than other groove shapes. For the novel GFJB (Ng = 6, Hg = 10µm), the load capacity and direct stiffness increase by about 6.67 and 13.5 per cent, respectively. The stability threshold speed (STS) of a rotor supported by the novel bearings is also increased.
Originality/value
The performance of the presented novel GFJB is enhanced immensely compared to the traditional bearings, and the results are expected to be helpful to bearing designers, researchers and academicians concerned.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2019-0307.
Keywords
Citation
Feng, M., Hu, H. and Ren, T. (2020), "Performance potential of gas foil journal bearings enhanced with micro taper-grooves on top foil", Industrial Lubrication and Tribology, Vol. 72 No. 3, pp. 299-306. https://doi.org/10.1108/ILT-08-2019-0307
Publisher
:Emerald Publishing Limited
Copyright © 2019, Emerald Publishing Limited