High-speed machining simulation of Ti6Al4V using a thermo-mechanical coupling model and velocity-dependent friction model
Abstract
Purpose
This study aims to establish a thermally coupled two-dimensional orthogonal cutting model to further improve the modeling process for systematic evaluation of material damage, stiffness degradation, equivalent plastic strain and other material properties, along with cutting temperature distribution and cutting forces. This enhances modeling efficiency and accuracy.
Design/methodology/approach
A two-dimensional orthogonal cutting thermo-mechanical coupled finite element model is established in this study. The tanh material constitutive model is used to simulate the mechanical properties of the material. Velocity-dependent friction model between the workpiece and the tool is considered. Material characteristics such as material damage, stiffness degradation, equivalent plastic strain and temperature field during cutting are evaluated through computation. Contact pressure and shear stress on the tool surface are extracted for friction analysis.
Findings
Speed-dependent friction models predict cutting force errors as low as 8.6%. The prediction errors of various friction models increase with increasing cutting forces and depths of cut, and simulation results tend to be higher than experimental data.
Social implications
The current research results provide insights into understanding and controlling tool-chip friction in metal cutting, offering practical recommendations for friction modeling and machining simulation work.
Originality/value
The originality of this research is guaranteed, as it has not been previously published in any journal or publication.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0162/
Keywords
Acknowledgements
The works described in this paper are substantially supported by a grant from the Key Technologies Research and Development Program (Grant No. 2021YFF0602005), Jiangsu Key Research and Development Plan (Grant Nos. BE2022129 and BE2022134), and the Fundamental Research Funds for the Central Universities (Grant Nos. 2242022k30031 and 2242022k30033), which are gratefully acknowledged.
Citation
Zhou, Z., Wang, Y. and Xia, Z. (2024), "High-speed machining simulation of Ti6Al4V using a thermo-mechanical coupling model and velocity-dependent friction model", Industrial Lubrication and Tribology, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/ILT-05-2024-0162
Publisher
:Emerald Publishing Limited
Copyright © 2024, Emerald Publishing Limited