Gallium‐based interconnects for flip‐chip assembly
Abstract
A feasibility study into alternative methods of producing interconnection between a PCB and flip‐chip has been undertaken. A number of initial ideas were investigated, the least promising being discarded at an early stage, while the ideas showing the greatest chance of success were subject to a more rigorous examination. Of the initial ideas the most promising were amalgam materials and magnetic alignment of ferromagnetic particles. These two ideas were combined to produce a new type of anisotropic conducting adhesive (ACA), which may have the potential to overcome problems owing to co‐planarity issues and have the ability to form fine pitch metallurgical bonds. In order to promote bonding, amalgam compositions that enhance surface wetting, while retaining good mechanical properties have been investigated. The possibility of incorporating liquid/semi‐solid metallic interconnects, within the ACA, which will retain contact during the thermal expansion of the polymeric materials was also explored. During the course of the study, various techniques such as DSC and SEM have been used to characterise thermal stability of Ga‐based alloys and discrepancies with current phase diagrams have been found.
Keywords
Citation
Stanfield, A.A. (1998), "Gallium‐based interconnects for flip‐chip assembly", Soldering & Surface Mount Technology, Vol. 10 No. 3, pp. 18-22. https://doi.org/10.1108/EUM0000000004546
Publisher
:MCB UP Ltd
Copyright © 1998, MCB UP Limited