To read this content please select one of the options below:

A novel filtering monopole antenna for 5G communications

Jasmine Vijithra A. (Department of Electronics and Communication Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, India)
Gulam Nabi Alsath Mohammed (Department of Electronics and Communication Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, India)

COMPEL - The international journal for computation and mathematics in electrical and electronic engineering

ISSN: 0332-1649

Article publication date: 2 May 2023

Issue publication date: 23 November 2023

60

Abstract

Purpose

This study aims to design a compact filtering monopole antenna for 5G communication. The design is most suited for various applications within the frequency range of 2.2–3.8 GHz. It offers enhanced bandwidth and reasonable gain with wide-stopband performance.

Design/methodology/approach

A low-pass filter (LPF) of complementary split ring resonator (CSRR) with short-circuited stub lines is integrated with a compact defected coplanar waveguide fed truncated circular monopole ultrawideband (UWB) antenna. The reference UWB antenna etched on an FR4 substrate was coupled to the designed LPF to transform the UWB antenna into a wideband antenna. The effect of coupling is analyzed based on the real and imaginary responses of the terminal impedance (ZT) curve. Three short-circuited stub lines of asymmetric lengths are added to the CSRR LPF to suppress harmonics, thereby enhancing the stopband performance and impedance matching between the elements. The proposed filtering antenna is fabricated using a photolithography process, and the corresponding results are measured using a network analyzer (N9951A). The radiation parameters of the proposed filtering monopole antenna are tested in the anechoic chamber. The simulated/measured results are compared and are found in agreement with each other.

Findings

The proposed design suppresses 6.5f0 harmonics, resulting in wide stopband performance and increased gain selectivity at the transition edge. A peak suppression of −41 dB and an average suppression of −18 dB were attained throughout the stopband. An operating fractional bandwidth of 54.5%/143% with a peak gain of 3 dBi/5 dBi was obtained. The proposed filtering antenna supports 5G applications such as WiMAX, WLAN, n7, n38 IMT-E, n30 WCS, n40 TDD, n41 TDD, n48 TDD, n78 TDD and n90 TDD.

Originality/value

The proposed design is novel and compact and has a wide application in 5G communication. With the filter, the antenna operates in wideband, and without the filter, it operates in UWB. Besides, it offers enhanced stopband performance with high gain selectivity at the transition edge. Comparatively, a 50% improvement in bandwidth, 52% improvement in size reduction and 33% improvement in harmonic suppression are attained.

Keywords

Acknowledgements

Declarations: Funding: No funding was obtained for executing this research.

Conflicts of interest/Competing interests: There is no conflict of interest concerning this submission.

Availability of data and material (data transparency): No new data was generated.

Code availability (software application or custom code): The work does not involve any software codes.

Ethics approval (include appropriate approvals or waivers): Not applicable.

Consent to participate (include appropriate statements): Not applicable.

Consent for publication (include appropriate statements): Not applicable.

Citation

A., J.V. and Mohammed, G.N.A. (2023), "A novel filtering monopole antenna for 5G communications", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 42 No. 6, pp. 1609-1623. https://doi.org/10.1108/COMPEL-12-2022-0435

Publisher

:

Emerald Publishing Limited

Copyright © 2023, Emerald Publishing Limited

Related articles