Design and performance analysis of cascaded pseudo derivative feedback plus pseudo derivative feedforward controller for PMSM drive

Abstract

Purpose

This paper aims to present a cascaded pseudo derivative feedback (PDF) plus pseudo derivative feedback plus pseudo derivative feedforward (PDFF) controller for a permanent magnet synchronous motor (PMSM) to improve the transient response of the system.

Design/methodology/approach

Proportional integral (PI) plus PI controller and the proposed PDF plus PDFF controller are designed, stability analysis is performed using the extended root locus method, and the effect of the damping coefficient is also extensively studied to validate the robustness of the proposed controller.

Findings

When compared to a cascaded PI plus PI controller, the proposed control approach has a much shorter settling time for the entire system and a 50% reduction in overshoot in stator current under extensive variations in speed with load disturbance.

Originality/value

The proposed controller is programmed into an FPGA Altera Cyclone II and applied to a 1.5 kW laboratory prototype PMSM drive. The effectiveness of the proposed methods has been demonstrated experimentally throughout a wide variable speed range, from 0 to 157 rad/s at different load conditions.

Citation

Koothu Kesavan, P., Subramaniam, U. and Almakhles, D.J. (2023), "Design and performance analysis of cascaded pseudo derivative feedback plus pseudo derivative feedforward controller for PMSM drive", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 42 No. 6, pp. 1867-1891. https://doi.org/10.1108/COMPEL-04-2023-0145