Assessment of corrosivity of emulsions from a petroleum sample on X80 steel

Abstract

Purpose

The purpose of this paper is to study the corrosion process by examining the deterioration of X80 steel exposed to a real petroleum sample containing condensed hydrocarbon plus oilfield-produced water, which were subjected to stimulated emulsions in flowing media at 50°C.

Design/methodology/approach

The impedance and polarization spectra were used to assess the aggressiveness of the petroleum sample and tried to find a washing process using condensed hydrocarbon with deionized water. Mössbauer technique was used to identify the phases in precipitated ions obtained during an oven-drying procedure of the oilfield produced water.

Findings

The emulsion, chloride, sulphur compounds, heavy metals and the use of a double hydrodynamic system were the most important factors affecting the corrosion of X80 steel. The corrosion rate of this steel increased when oilfield-produced water was stimulated by a double hydrodynamic system (4.56 mm/year). It was determined to be 7.66 mm/year and 4.01 mm/year when steel was exposed to a stimulated emulsion using the petroleum sample and condensed hydrocarbon with deionized water at 24 h, respectively, suggesting that a significant process of hydrocarbon washing could occur and a more corrosive solution was highlighted. Mössbauer results showed that the ions precipitates included the following phases at Wt.%: magnetite (20.0), greigeite (22.8), siderite (3.2), pyrite (2.9), marcasite (26.7) and mackinawite (24.4).

Originality/value

A stimulated hydrocarbon/water emulsions with a more homogeneous solution containing high concentrations of saline compounds and heavy metals were used to simulate the susceptibility to corrosion on the internal pipeline steels exposed to any type of immiscible liquids such as condensed hydrocarbon, or crude oil, containing water. A practical application of the presented research could provide a novel framework for understanding the internal corrosion in pipelines from the simulation of washed hydrocarbons after the stimulated emulsions that can be found in the field. Because more susceptibility to corrosion for pipeline steels would be expected at the end of the transportation of the fluid. It is possible to investigate the possible corrosion mechanisms by using a dried oilfield-produced water sample interacting with the pipeline steels.

Citation

Quej-Ake, L.M., García Jiménez, S., Liu, H., Alamilla, J.L. and Angeles-Chavez, C. (2022), "Assessment of corrosivity of emulsions from a petroleum sample on X80 steel", Anti-Corrosion Methods and Materials, Vol. 69 No. 2, pp. 131-140. https://doi.org/10.1108/ACMM-06-2021-2492