Topology design and freeform fabrication of deployable structures with lattice skins

Abstract

Purpose

Solid freeform fabrication is particularly suitable for fabricating customized parts, but it has not been used for fabricating deployable structures that can be stored in a compact configuration and deployed quickly and easily in the field. The purpose of this paper is to present a methodology for deploying flexible, freeform structure with lattice skins as the deploying mechanism.

Design/methodology/approach

A ground structure‐based topology optimization procedure is utilized, with a penalization scheme that encourages convergence to sets of thick lattice elements that are manufacturable and extremely thin lattice elements that are removed from the final structure.

Findings

A deployable wing is designed for a miniature unmanned aerial vehicle. A physical prototype of the optimal configuration is fabricated with selective laser sintering and compared with the virtual prototype. The proposed methodology results in a 78 percent improvement in deviations from the intended surface profile of the deployed part.

Originality/value

The results presented in the paper provide proof‐of‐concept for the use of lattice skins as a deployment mechanism. A topology optimization framework is also provided for designing these lattice skins. Potential applications include portable, camouflaged shelters and deployable aerial vehicles.

Citation

Maheshwaraa Namasivayam, U. and Conner Seepersad, C. (2011), "Topology design and freeform fabrication of deployable structures with lattice skins", Rapid Prototyping Journal, Vol. 17 No. 1, pp. 5-16. https://doi.org/10.1108/13552541111098581