To read this content please select one of the options below:

Tracking space‐vector plot asymmetries in transformer differential relaying

Guzmán Díaz (Department of Electrical Engineering, University of Oviedo, Gijón, Spain)
Pablo Arboleya (Department of Electrical Engineering, University of Oviedo, Gijón, Spain)
Javier Gómez‐Aleixandre (Department of Electrical Engineering, University of Oviedo, Gijón, Spain)
507

Abstract

Purpose

Differential relaying is one of the most widely used techniques for protecting power transformers. The purpose of this paper is to discuss and cover a developed methodology for analyzing the signals obtained from the differential protection of power transformers.

Design/methodology/approach

The differential signal obtained from the protective relays of power transformers is analyzed in this paper, in order to establish a relation between time‐dependent symmetrical components and space vectors. As a result of the formulation of such a relation, specific patterns are obtained and classified for the plot of the space vector during fault and inrush conditions.

Findings

What was found in the course of the work? This will refer to analysis, discussion, or results. It has been found that the discrimination between inrush and fault conditions is possible by observing a characteristic asymmetry in the plots of the space vector. A method for dealing with the said asymmetries based on the absolute value of the space vector as obtained from the differential signal is proposed and discussed. The theoretical approaches given in the paper are further validated through finite element simulations and laboratory tests, which include linear and non‐linear loads, in order to account for more severe exploitation conditions.

Research limitations/implications

A complete protective algorithm can be developed from the analysis of the methodology proposed, which avoids the spectral analysis, since the methodology is based in pattern analysis rather that in the latter technique.

Practical implications

The methodology provides faster identification of the fault during inrush condition, since the spectral analysis is prevented.

Originality/value

It may be stated that the major contribution of the paper is the methodology proposed for identifying internal faults in power transformers using pattern characterization of the plot of the space vector.

Keywords

Citation

Díaz, G., Arboleya, P. and Gómez‐Aleixandre, J. (2005), "Tracking space‐vector plot asymmetries in transformer differential relaying", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 24 No. 3, pp. 1023-1040. https://doi.org/10.1108/03321640510571228

Publisher

:

Emerald Group Publishing Limited

Copyright © 2005, Emerald Group Publishing Limited

Related articles